Dulce-systems PRO IDC with g2 trays Manual do Utilizador Página 7

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 19
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 6
Page 12
PRO IDC Installation and User’s Manual
3.4. Independent Left and Right Controllers
Each controller is independent of each other. Each controller manages its own
set of eight drives. One controller does not have access to the other controller’s
disk drives.
The Right Controller manages drives 1 to 8 and also monitors the Cooling Fans
status.
The Left Controller manages drives 9 to 16 and also monitors the Power Supply
status.
4. Installation
Please follow these few steps to install the
takes about 30
minutes to complete.
Overview of installation:
Rackmount installation
Disk Module Installation
FC Cables Installation
Ethernet Configuration
RAID Manager
Installation
By default, the
PRO IDC
and pre-
formatted for Apple Mac OS X.
Sheet for your exact configuration.
Windows operation will
IDC is shipped
already pre
Windows Disk Management utility to prepare the RAID for Windows
usage.
4.1.
Rackmount Installation
The PRO IDC
can be rackmounted to a standard 19”
required.
An optional rackmount kit is available for 24”
Mount the left and right rails to the rack, ensure sufficient 3u space is available.
Adjust depth as required.
Mount the lef
t and right sliders on the
The PRO IDC
loaded with Disk Modules will be
IDC
to the rack before installing the drives will make it easier.
the PRO IDC
carefully on the rack by aligning the sliders in the rails.
Front heavy topple warning
IDC in the rack
extended position when mounted on the rack, your
entire rack might tip over and will cause se
Page
PRO IDC Installation and User’s Manual
Please follow these few steps to install the
PRO IDC. T
his process typically
minutes to complete.
Installation
PRO IDC
is shipped pre-configured in RAID 5
mode
formatted for Apple Mac OS X.
Check the Pre-
configuration
Sheet for your exact configuration.
Windows operation will
require a format/partition process. The
PRO
already pre
-configured in RAID 5. S
imply run the
Windows Disk Management utility to prepare the RAID for Windows
Rackmount Installation
can be rackmounted to a standard 19”
rack. 3u height space is
An optional rackmount kit is available for 24”
to 30” depths.
Mount the left and right rails to the rack, ensure sufficient 3u space is available.
t and right sliders on the
PRO IDC.
loaded with Disk Modules will be
heavy, install the
to the rack before installing the drives will make it easier.
Install
carefully on the rack by aligning the sliders in the rails.
Front heavy topple warning
Do not operate or configure the PRO
extended position when mounted on the rack, your
entire rack might tip over and will cause se
vere damage
and harm
Page
13
PRO IDC Installation and User’s Manual
his process typically
mode
configuration
PRO
imply run the
Windows Disk Management utility to prepare the RAID for Windows
rack. 3u height space is
Mount the left and right rails to the rack, ensure sufficient 3u space is available.
heavy, install the
PRO
Install
carefully on the rack by aligning the sliders in the rails.
Do not operate or configure the PRO
extended position when mounted on the rack, your
and harm
.
Vista de página 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

Comentários a estes Manuais

Sem comentários